This is a made-to-order product. The estimated delivery time is 2-4 weeks depending on the order status. Please note that the delivery date may be delayed depending on the manufacturer's order status.
1-inch throat wood horn
Straight type horn with the most natural spread
Sufficient frequency response down to low frequencies near the cutoff
The crossover frequency of the SS-500 allows for a crossover frequency as low as 800 Hz with a cutoff of 500 Hz.
Directivity is 70 degrees horizontally and 30 degrees vertically, a very natural spreading shape and design. The cast metal throat adapter has a setting base on both sides of the horn when in use, and is supported at three points, limiting the contact surfaces to three points and concentrating the weight of the driver and horn at those points, thereby suppressing vibration and greatly reducing interference and turbulence in the mid and low frequencies.
It is compatible with both Artic and JBL mounting screws.
Both SS-500s can be built into an enclosure by drilling a hole in the mounting flange and attaching with wood screws.
Model | Special Straight Horn |
---|---|
Horn cutoff frequency | 500Hz |
Recommended crossover | 800Hz |
Directivity | 70° horizontal, 30° vertical |
Throat diameter | 2.54 cm (1 inch) |
Compatible unit | TAD2001, JBL2425, ALTEC 1-inch throat driver unit |
Horn Material | Asada cherry laminated wood, longitudinal use |
Dimensions | 316(W)×200(H)×260(D)mm |
Weight | 5.4kg |
Material of throat section | Cast gunmetal, black zinc plating |
Designs, specifications, standards, etc. are subject to change without notice for improvement.