Yamamoto Sound Craft MGB-1 Magnet Floating Base

The MGB-1 uses a revolutionary configuration that uses magnet repulsion and floats the equipment used. The magnet adopts the neodymium magnet with the highest retention power, and is designed to be used even for fairly heavy equipment. It adopts beautiful African ebony with high seismic effect and neodymium magnet with the highest retention power. Devices surfaced with magnets have very little vibration from the floor and very little influence from the speaker. It can prevent sound deterioration caused by seismic motion and resonance. As a result, the S/N ratio improves, the information volume becomes rich, the sound becomes more clear and the presence increases. In the MGB-1 case, the top and bottom surfaces of this base are combined with three-point supported ceramic spacers, so the equipment installed above is supported by points, and further clear playback sound is obtained. The upper and lower magnets are fixed to African ebony material and combined with thin bolts. When used, the weight of each base must be equal.

Sister ProductsMGB-2Example of operation

When using this product, please be careful when combining it with a product that is susceptible to magnetism because this product uses magnets. For example, please note that magnetic effects can be considered on the upward pressure transformer for the MC cartridge and the cassette deck.

Dimensions	Diameter 59mm, Height: 58.8mm ~ 47mm
Material	African ebony, neodium magnet, ceramic spacer
Load Resistance	2kg ~ 10kg per piece
Weight	210g (1 piece)

You can buy 4 pieces, 3 pieces, and 1 piece.