Yamamoto Acoustic Kogei Straight Type Wood Horn SS-300 1 piece
Product code: yo-ss300Yamamoto Acoustic Kogei Straight Type Wood Horn SS-300 1 piece
Could not read receipt status
This is a made-to-order product. The estimated delivery time is about 1 month depending on the order status.
Straight type horn with the most natural spread
2-inch straight type horn with the most natural spread
The SS-300 is made of laminated Asada cherry wood, which has a good sound resonance, and is manufactured as an extremely thick 140 mm laminated wood block, which is then cut into a three-dimensional curved surface to form the horn.
Sufficient frequency response down to low frequencies near the cutoff
The crossover frequency of the SS-300 allows for a low frequency crossover of 500 Hz against a cutoff of 300 Hz.
Directivity is 70 degrees horizontally and 30 degrees vertically, a very natural spreading shape and design. The cast metal throat adapter has a setting base on both sides of the horn when in use, and is supported at three points, limiting the contact surfaces to three points, and concentrating the weight of the driver and horn at those points, thereby suppressing vibration and greatly reducing interference and turbulence in the mid and low frequencies.
It is compatible with both Artic and JBL mounting screws.
Both SS-300s can be built into the enclosure. Embedded nuts can be incorporated for easy integration into the enclosure.
*The embedded nut is optional.
| Model | Special Straight Horn |
|---|---|
| Horn cutoff frequency | 300Hz |
| Recommended crossover | 500Hz |
| Directionality | 70° horizontal, 30° vertical |
| Throat diameter | 4.9cm (JBL/TAD type 2 inches) |
| Compatible unit | TAD4001,JBL2441,2450, AD1420(ALTEC288-16k) etc. |
| Horn Material | Asada cherry laminated wood, longitudinal use |
| Dimensions | 620(W)×280(H)×430(D)mm |
| Weight | 18kg |
| Material of throat section | Cast gunmetal, black zinc plating |
