Yamamoto Acoustic Craft Large Speaker Stand DK Series 1 unit
Product code: dks-1Yamamoto Acoustic Craft Large Speaker Stand DK Series 1 unit
Could not read receipt status
This is a made-to-order product. Delivery time will be about 3 weeks. Price is for one unit.
If you need two speakers, please purchase two speakers.
Bring out 100% of the speaker's performance!
Stand for large speakers that firmly supports speakers while taking advantage of the resonance of cherry wood
The DK series speaker stands are designed for medium to large size speakers, and are constructed with 10cm square Asada cherry wood posts at the four corners and a 30mm thick cherry plywood joint in the center to support the speakers. The speakers are placed on the four pillars.
The weight of the speaker is placed downward on the pillars, so even a heavy speaker weighing approximately 100 kg can be installed stably. The standard type is 350x480x400(H)mm for Tannoy Stirling and 440x650x250(H)mm for JBL. The margin between the speaker and the pillar is 1cm. Various speaker sizes can be accommodated by changing the size of the joint between the pillar and the center section.
| DK-40 (for TANNOY STIRLING) | 350×480×400(H)mm |
|---|---|
| DK-25(for JBL4344) | 440×650×250(H)mm |
| Load capacity | Approx. 100kg |
We also offer custom-ordered speaker stands with a fall-preventing structure, which are used in recording studios for professional use. The structure is such that the speaker is inserted into the four legs of the DK series stand to prevent lateral displacement and tipping.
The four L-shaped legs enclose the bottom of the speaker and prevent it from tipping over. The lowered area in the center is the speaker installation area. Speakers placed in this area are prevented from tipping over.
