Satri Circuit Laboratory VHA-5240B Headphone Amplifier for VR
Product code: VHA-5240BSatri Circuit Laboratory VHA-5240B Headphone Amplifier for VR
Could not read receipt status
Please note that the delivery date may be delayed depending on the manufacturer's order status.
More reality in sound!
Headphone amplifier for VR goggles
VHA-5240B is a headphone amplifier developed for VR goggles, which now allow users to easily enjoy 3D images.
The VHA-5240B reproduces the surround sound used in VR accurately, precisely, and with no time lag. The VHA-5240B clearly reproduces a sense of direction and distance, including flat phase characteristics that emphasize the localization of binaural recordings, adding further realism to the virtual reality world.
The VHA-5240B provides stereo input and output as well as separate left and right monaural input and output to accommodate different models of VR goggles, some of which have stereo earphone output and others have separate left and right monaural output. The VHA-5240B does not have a volume control (gain controller) because it is designed to be used in combination with goggles with volume control. The case is made of conductive carbon mixed filament to prevent inductive noise.
From the virtual world to the real world
The amplifier built into the VR goggles is loaded by the use of earphones. The heavier the load, the worse the distortion, the worse the transient characteristics, and the worse the delay time, etc. The VHA-5240B precisely controls the bias current to maximize the amount of information and increase accuracy. Furthermore, by widening the bandwidth and using a no-feedback circuit that does not apply negative feedback, transient distortion such as TIM distortion is eliminated and time delays are minimized to the maximum extent possible, thereby eliminating phase distortion and enabling surround sound localization to be accurately expressed. By connecting the VHA-5240B to the earphone output of the goggles, the load when using earphones can be reduced, preventing deterioration of the characteristics. For this reason, further improvement in accuracy and increase in the amount of information can be expected over the 5240A. A pure signal with no deterioration of characteristics is extracted to drive the earphones with a precise driver circuit. This enables precise reproduction of the phase and time information required for VR and realistic reproduction of the world of virtual reality.
| Maximum Output | 350mW (1% distortion) |
|---|---|
| Distortion(1KHz) | 1mW: 0.026 |
| S/N Ratio | -110dB(GAIN 1dB) |
| Frequency Response | 5Hz~5MHz(-3db) |
| Delay Time | 18nS(1/100 million of 1.8 sec) |
| Input impedance | 1,000KΩ |
| Dimensions | W74x H27x D44mm |
| Weight | 46g |
| Power source | DC 5V/300mA |
*Cables and other accessories are not included with this product. Please provide your own power supply and cables.
