Unparalleled transparency
All-vacuum tube buffer preamplifier
The PRE12 is an all-vacuum tube buffered preamplifier with low output impedance and very high transparency, featuring four selectable inputs and a relay-switchable volume control with discrete resistors. All amplification stages are 100% vacuum tube OTL designs, and no semiconductor components, transformers, or chokes are used in the audio configuration.
Volume and input selection can be controlled by remote control.
Advanced stabilized power supplies for anodes and heaters keep hum and noise levels very low. The amplifier consists of three PCBs, chassisThe chassis is made of 10 mm thick aluminum, providing excellent mechanical stability and completely eliminating noise caused by vibration.
The PRE12 is ideal for use with the PA12 or PA34 OTL power amplifiers, as the low distortion performance of the PA12 or PA34 places high demands on the preamplifier, and the PRE12 meets these goals without compromising the crystal clear sound from the PA12 or PA34. The PRE12 meets these goals and does not detract from the crystal clear sound from the PA12 or PA34. Of course, if you need an extremely transparent preamp for any other system, the PRE12 is the perfect choice.
The PRE12 uses Q-tron Audio's proprietary 64-step attenuator instead of a typical potentiometer for highly accurate and reliable volume control. While there are some good quality potentiometers on the market, our attenuator eliminates the channel-to-channel imbalance that potentiometers cause and provides better performance than any potentiometer.
This attenuator has 64 positions and allows adjustment in 1 dB steps. Each step is precisely switched using relays with gold-plated contacts, and the channel balance is accurate to within ±0.05 dB at any volume setting. It also boasts an extremely high accuracy of up to 0.02 dB, maximizing audio transparency and dynamics. This design allows for smooth and precise volume control, greatly enhancing the quality of the audio experience, making Q-tron Audio's 64-step attenuator the perfect choice for audiophiles seeking a level of precision and sound quality unattainable with conventional products.
Vacuum Tube | 6N6Pi x2 |
---|---|
Gain | -1dB (0.85x) |
Channel Balance | ±0.05dB |
Input impedance | 40kΩ |
Output impedance | 300Ω |
Harmonic distortion (THD) | < 0.001% at 1kHz, 1V output |
Frequency response | 5Hz ~ 100kHz (-1dB) |
Hum and Noise | < -100dBA at 1V output |
Volume control | 64 steps |
Input terminals | 2 gold-plated phono, 2 balanced XLR |
Output terminals | 1 gold-plated phono, 1 balanced XLR |
Dimensions | 430 x 110 x 370 mm, (W x H x D) |
Weight | 11.5 kg |