Extract 100% of the performance of Alpair7MS, Pluvia7HD, etc.
A kit with the same finish as the finished product
Based on the NC7v2, a very popular product in the Nature Collection series, we will release a new kit with a finish that is the same as the product, carefully cut by craftsmen using domestic red pine laminated wood. The photo shows the Alpair7MS attached, but you can also use the Pluvia7HD and CHR70 series frames. This kit includes not only the cut wood, but also the internal materials needed to create the sound. Included materials: Betaumene material, variable bass reflex port STBP35x2, thermowool, reinforcement material, finishing application oil, etc.
Japan traditional nesting processing
The machining accuracy is finely processed by the inset of uneven surfaces (ileco group). Unlike general speaker kits, it is designed to be finished in a highly sealed enclosure without requiring special workmanship.
Just by fitting the unevenness, it becomes a splendid box shape. Even if you apply a lot of glue and tighten it strongly with a clamp, you don't have to worry about the board shifting.
By increasing the airtightness and sturdiness of the adhesive part, each board is integrated, and it serves as an enclosure to enhance bass and the warm and sticky sound of red pine.
Dump Material Bechumen, Variable Bass Reflex Port
There are no parts that have been cut out on the attached parts, such as the traditional British dump material Bechumen used in the Nature Collection, two sets of STBP35 that can finely adjust the bass reflex resonant frequency according to the room, and the highest quality binding posts.
Compatible Units
size | 355 x 190 x 245 (H×W×D/mm) |
---|---|
Plate thickness | 18mm |
Internal volume | Approx. 10L |
method | bassreflex |
material | Domestic red pine laminated wood |
Compatible Units | Alpair7MS/ Pluvia7HD / PHD |
weight | Approx. 4.2kg/unit |