ESOTERIC D-2 D/A Converter

This D/A converter was released by TEAC under the ESOTERIC brand in 1989, and while it was designed to be paired with the P-2, it also offers excellent performance and functionality as a standalone D/A converter. The D/A converter is equipped with an auto search mechanism to accommodate various digital inputs, and achieves a wide locking range with high accuracy.

A 45-bit 8x oversampling digital filter is used for the digital filter, and a newly developed noise shaper is used to convert the accurately calculated 45-bit gradation information to 18 bits, so that even ultra-fine signals of 18 bits or less are not truncated and the resolution below the noise level is achieved. The resolution below the noise level is achieved without truncating the ultra-fine signals below 18 bits, and the linearity of the fine levels is enhanced.

The newly developed distortion shaper (ZD-II) with high-pass dither for ultra-low distortion improves the signal-to-noise ratio and disperses the conversion error of the D/A converter, further enhancing the distortion shaping effect for a significantly lower distortion rate.

Condition	Good functionality. Appearance is average 7/10.
Accessories	Instruction manual

Model Number	D/A Converter
Sampling Frequency	32kHz, 44.1kHz, 48kHz ±0.1% (auto switching)
Digital input	Optical: 2 channels Coaxial: 2 channels
Analog output	XLR(Balanced, 1 system):2.5Vrms RCA(1 system):2.5Vrms *Both digital volume
Digital output	Coaxial (1 system): 0.5Vp-p
Frequency response	32kHz: 0 to 15Hz ±0.3dB 44.1kHz: 0 to 20kHz ±0.3dB 48kHz: 0 to 22kHz ±0.3dB
S/N ratio	110dB or better (1kHz)
Dynamic Range	100dB or more (D/A section 108dB)
Harmonic distortion	0.0014% or less (1kHz)
Wah Flutter	Below measurement limit (crystal accuracy)
Channel Separation	110dB or better (0 to 20kHz)
D/A converter	18-bit 4DAC + "ZDII" circuit
Digital Filter	45-bit, 8x oversampling digital filter + noise shaping
Analog filter	3rd order Butterworth filter
Power supply	AC100V, 50Hz/60Hz
Dimensions	Width 225 x Height 134 x Depth 425mm (including legs)
Weight	11kg