Emission Labs EML 5U4GM Mesh Plate 1 pc.

Applies to 5Z3-Mesh and 5U4G-Mesh, which are electrically identical except for the socket.5U4G-Mesh is used as an Octal Socket socket and only 5 pins of it are used (one of them is not electrically connected).5Z3-Mesh uses a 4-pin UX4 socket.

Note that EML tubing is slightly larger in size than conventional tubing.Like most NOS rectifiers, the EML rectifier is a slow-start tube, which provides some protection for the power supply and the overall amplifier.The delay time for the first function is 2 seconds and the maximum current delay is 7 seconds.

A special element for stabilizing the heater voltage is included inside the tube glass.These elements increase resistance at higher currents and help protect the heater from accidental overvoltages.

• Special elements are included inside the tube glass to stabilize the heater voltage. These elements increase resistance at higher currents and help protect the heater from accidental overvoltages.
• Slow Start (2 to 7 seconds)
• For optimal symmetry of the two diodes inside, the filaments are connected in series.
• Each tube is numbered and has a metal tag inside the bulb.
• Two oversized getters flush the entire bottom of the tube.
• Tubes printed with real gold (metal) and red color burned into the glass.

Filament Rating

Maximum Rating(Not available at the same time)