The fusion of LCNV copper and pure silver single-wire conductors demonstrates the pinnacle of Luna Cables.
Noir balanced interconnect with dedicated neutral conductor
About the Noir Series
The Noir series is the top line positioned as the flagship of Luna Cables. By combining the musicality of LCNV (Luna Cable Neo Vintage) copper conductors, cultivated in lower series, with ultra-pure single-wire silver conductors, it raises the natural musical expression that is the core of the Luna sound to an even higher level. LCNV copper conductors feature waxed cottondielectricFor pure silver single-wire conductors, oiled cottondielectricWe optimize and use each one accordingly, bringing out the characteristics of each material to the fullest.

The sound of Noir is, above all, based on overwhelming silence. By allowing the noise floor to sink deeply, subtle sound details and the resonance of the space, which were previously buried, naturally emerge, so that the breath of the performer and the lingering tones of the instruments can be felt as if you could touch them. The rich harmonics provided by the copper conductor and the delicate resolution provided by the pure silver conductor come together, portraying the presence of the music itself without becoming analytical. All terminals are rhodium-plated, ensuring contact quality befitting a top-of-the-line series.
Product Concept
The Luna Cables Noir XLR is an XLR interconnect that adds a design dedicated to balanced transmission to the same copper-silver hybrid conductor configuration as the Noir RCA. Each polarity includes three LCNV 22AWG copper conductors and two 26AWG pure silver single-wire conductors, in addition to one LCNV 14AWG conductor dedicated to the neutral (cold/ground). This dedicated neutral conductor ensures the precise signal balance required for balanced transmission.
Each conductor is wrapped in waxed cotton and oiled cottondielectricIndividually insulated and then protected with a tin-plated copper braided shield over an auxiliary cotton insulation and vibration damping layer. The terminals use XLR connectors with rhodium-plated copper contacts, and all connections are finished by hand soldering. They demonstrate flagship performance in balanced connections between preamplifiers and power amplifiers, as well as between DACs and preamplifiers.

The sound produced by the hybrid conductor of copper and silver is full of vitality and musicality. It extends naturally from high to low frequencies, and while its precise timing injects energy into the performance, it does not cause fatigue even after long listening sessions. Unlike inexpensive balanced cables, which often sound rounded and lifeless in low and high ranges, it faithfully delivers the natural breaths and nuances of music.
Luna Cables: Cables born from the hands of artisans in Montreal
Luna Cables is a handmade audio cable brand based in Montreal, Quebec, Canada. All products are produced in small quantities in the workshop, with each cable finished by hand craftsmanship. The meticulous attention to detail and dedication to materials, which are absent in mass-produced products, support the musicality of Luna Cables.

■ LCNV Conductor (Luna Cable Neo Vintage): A one-of-a-kind conductor created using vintage processing machines.
LCNV is an in-house manufactured copper conductor produced with Luna Cable's unique blend and proprietary manufacturing process. Instead of using cutting-edge CNC machines, they deliberately use vintage wire processing machines, resulting in a conductor with a distinctive crystal structure and flexibility that modern precision machinery cannot replicate. This approach of leveraging the qualities of 'old things' in modern hi-fi is at the heart of the Luna sound.

■ Pure Silver Single-Strand Conductors and Oiled Cottondielectric: Supporting the resolution of the Noir series
In the Noir series, in addition to LCNV copper conductors, 26AWG pure silver single-wire conductors are also used. Pure silver has higher electrical conductivity compared to copper and provides delicate and transparent high-frequency resolution. This pure silver conductor is soaked with oil-impregnated cotton.dielectricUsed as [a material], ensuring low dielectric constant and vibration damping. Waxed cotton of copper conductordielectricBy using them selectively, we bring out the musical characteristics of each conductor to the fullest.

■ All connections hand-soldered, uncompromising craftsmanship
All Luna Cables are hand-soldered connection by connection. The precise connection quality that cannot be achieved with mass production directly contributes to signal clarity and long-term reliability. This meticulous process is one of the reasons Luna Cables can stand alongside top audio brands.

■ Cotton jacket: unified natural materials from inside to outside
The exterior uses a flexible, easy-to-handle cotton jacket. It has moderate flexibility and sound absorption not found in synthetic resin tubes, suppressing unnecessary tension and vibration propagation during installation. Luna's philosophy of unifying materials with natural substances from the inside out is reflected here as well.

Main Features
- LCNV 22AWG copper conductors × 3 strands (waxed cotton)dielectric/ Polarity:Uses three LCNV 22AWG copper conductors per polarity. Waxed cottondielectricThe copper conductor covered produces warm, rich harmonics and musical thickness.
- 26AWG Pure Silver Single Wire Conductors × 2 (Oiled Cotton)dielectric/Polarity:In addition to copper conductors, pure silver single wire conductors are used together. The delicate and transparent high-frequency resolution brought by pure silver adds spatial information and fine details to the musicality of the copper conductors.
- Dedicated Neutral Conductor (LCNV 14AWG × 1):A dedicated LCNV 14AWG conductor is placed for the neutral connection of balanced transmission. The thick conductor stabilizes the neutral path and enhances the accuracy of the balanced signal.
- Auxiliary Cotton Insulation & Vibration Damping Layer + Tin-Plated Copper Braid Shield, Rhodium-Plated Copper XLR:A tin-plated copper braid shield is applied over the auxiliary cotton insulation and vibration damping layer to block external noise. XLR terminals with rhodium-plated copper contacts are used, and all contact points are hand-soldered.

| Conductor (Copper) | LCNV (Luna Cable Neo Vintage) 22AWG × 3 / Polarity |
|---|---|
| Conductor (Silver) | 26AWG Pure Silver Single Wire × 2 per polarity |
| Neutral Conductor | LCNV 14AWG × 1 |
| dielectric(Copper Conductor) | Waxed Cotton |
| dielectric(Silver Conductor) | Oiled Cotton |
| Shield | Auxiliary Cotton Insulation / Vibration Damping Layer + Tin-Plated Copper Braid |
| Outer Jacket | Cotton Jacket |
| Connector | Rhodium-Plated Copper Contact XLR |
| Connection Method | All Contacts Hand-Soldered Finish |
| Manufacturing | Handmade (Montreal, Canada) |
| Lineup (Lengths) | 0.5m / 1.0m / 1.5m / 2.0m / 2.5m |









