Limited quantity. For model change, it is available at special price of chassis stock disposal! Don't miss this opportunity! All transformers used are made from astro electronics.
Versatile output pipe
Robust and beautiful mirror finish chassis
The chassis is a 2mm thick 18-18 stainless steel mirror finish. Internal mounting parts include a 1.5-2mm thick 18-18 stainless steel mirror finish material and a 2mm thick oxyless copper chassis. This sturdy and beautiful mirror finish casing has a great effect on anti-vibration and noise control. Since the heat dissipation is also firm, it is a vacuum tube amplifier but it is no problem to use it for a long time.
All transformers used are made from Kanno Electric to Astro Electronics with equivalent quality or higher. ASTRO ELECTRONICS original transformer is able to reproduce high quality sound with more natural spread and stretch of low range.
By self-biasing, you can enjoy various sounds by freely replacing the output tube of the same system. The self-bias condenser adopted by the company uses a different magnitude capacitor with considerable margin in capacity than the capacitor used by the general manufacturer. As a result, even if the volume is narrowed, the sound is not slimmed down, and it is expressed firmly.
Use vacuum tube | KT88 x4, 12AX7x2, 12AU7x4 |
---|---|
Use Transformer | TRX-300M x1, FP-60-W8 x2, L-2-300M x1 |
Output | 25W x 25W |
UL Connection | Self-bias |
Frequency Characteristics | 10Hz~60kHz |
Residual noise | Below / |
Distortion | 0.036% / 1W |
Input Impedance | 100kΩ |
Size | 約W450xH200xD400mm |
Weight | About 24kg |
All of the transformers used will be from Asutro Electronics, which are of equal or higher quality than those made by Kanno Electric. Please note that there may be slight changes in specifications.


