Yamamoto Sound Craft Straight Type Wood Horn SS-300 1 piece
Product code: yo-ss300Yamamoto Sound Craft Straight Type Wood Horn SS-300 1 piece
Failed to load receipt status
It will be a made-to-order product. Depending on the order status, the estimated delivery time will be about 1 month.
The most natural straight-type horn
The most natural 2-inch straight horn
The SS-300 is made of ASADA Sakura laminated wood, which has a good sound, into extremely thick laminated wood blocks of 140 mm, which are then carved into a three-dimensional curved surface to make horns.
Sufficient frequency response down to low frequencies near the cutoff
The SS-300 has a cutoff of 300 Hz and a cross at a low frequency of 500 Hz.
The directionality is 70 degrees horizontally and 30 degrees vertically, and the shape and design expand quite naturally. The gun metal cast throat adapter has a setting base on both sides of the horn when in use, and the contact surface is limited to three points as a three-point support, and the weight of the driver and horn is concentrated at that point to suppress vibration and greatly reduce disturbance and interference in the mid and low frequencies.
It is compatible with both Altic and JBL mounting screws.
Both SS-300s can be integrated into enclosures. Embedded nuts can be integrated and can be easily integrated into enclosures.
* Embedded nut is optional.
| Model | Special Straight Horn |
|---|---|
| Horn cutoff frequency | 300Hz |
| Recommended Crossover | 500Hz |
| Directivity | 70 degrees horizontal, 30 degrees vertical |
| Throat diameter | 4.9cm (JBL/TAD type 2 inch) |
| Compatible Units | TAD4001, JBL2441, 2450, AD1420 (ALTEC288-16k), etc. |
| Horn Material | Asada cherry laminated wood, longitudinal use |
| External dimensions | 620(W)×280(H)×430(D)mm |
| weight | 18kg |
| Throat material | Gunmetal casting, black galvanized |
