Yamamoto Sound Craft MGB-2 Magnetic Floating Base

MGB-2MGB-1It is intended for lightweight devices that have been miniaturized.MGB-1When using 4 pieces, equipment from 8 kg to 40 kg could be used, but it could not be used for lighter equipment. The MGB-2 is designed for products weighing less than 10 kg. This includes preamplifiers, CD players, phono equalizers, and DA converters. African ebony, which has a high seismic damping effect and a beautiful sound, and neodymium magnets, which have the highest retention power, are used to achieve high performance despite their small size. Devices levitated by magnets are almost immune to vibrations from the floor and are extremely unaffected by vibrations from speakers. It can prevent sound degradation caused by vibration and resonance. As a result, the signal-to-noise ratio is improved, the amount of information is richer, the sound is clearer, and the presence is increased. The upper and lower magnets are fixed to African ebony wood, which are joined by thin bolts. When used, the weight of each base must be equal.

When using this product, please be careful not to combine it with products that are susceptible to magnetism due to the use of magnets. For example, a step-up transformer for MC cartridges or a cassette deck may be affected by magnetism.

External dimensions	Diameter 49mm, Height: 45mm ~ 37mm
material	African Ebony, Neodymium Magnet
Load-bearing capacity	0.9kg~3kg, 2.7kg~9kg/3 pieces, 3.6kg~12kg/4 pieces
weight	170g (1 piece)

It is also possible to sell 4 pieces, 3 pieces, and 1 piece.