Yamamoto Sound Craft MGB-1 Magnetic Floating Base

The MGB-1 uses an innovative configuration that uses the rebound of the magnet to float the equipment used. The magnet uses a neodymium magnet with the highest holding power and is designed to be used with fairly heavy equipment. It uses African ebony, which has a high seismic damping effect and a beautiful sound, and neodymium magnets, which have the highest holding power. Devices levitated by magnets are almost immune to vibrations from the floor and are extremely unaffected by vibrations from speakers. It can prevent sound degradation caused by vibration and resonance. As a result, the signal-to-noise ratio is improved, the amount of information is richer, the sound is clearer, and the presence is increased. In the case of the MGB-1, the upper and lower surfaces of this base are combined with ceramic spacers with a three-point support, so that the equipment installed on top is supported by the point, and a clearer reproduction sound can be obtained. The upper and lower magnets are fixed to African ebony wood, which are joined by thin bolts. When used, the weight of each base must be equal.

Sister productsMGB-2Operational example

When using this product, please be careful not to combine it with products that are susceptible to magnetism due to the use of magnets. For example, a step-up transformer for MC cartridges or a cassette deck may be affected by magnetism.

External dimensions	Diameter 59mm, Height: 58.8mm ~ 47mm
material	African Ebony, Neodymium Magnet, Ceramic Spacer
Load-bearing capacity	2kg~10kg per piece
weight	210g (1pc)

It can be purchased in sets of 4, 3 pieces, and 1 piece.