It will be a made-to-order product. The delivery time will be about 3 weeks. The price is for 1 unit.
If you need 2 speakers, please purchase 2 speakers.
Get 100% out of your speakers!
A stand for large speakers that firmly supports the speakers while taking advantage of the good sound of cherry wood
The DK series is a speaker stand designed for medium to large speakers. It is a high-performance stand that is strongly assembled by erecting 10 cm square timber posts of Asada cherry blossoms at the four corners, and supporting the center part with joints made of 30 mm thick cherry plywood. The speaker will be placed on four pillars.
Since the weight of the speaker is placed downward on the support, it is possible to stably install a heavyweight speaker weighing about 100 kg. The standard variants are 350x480x400(H)mm for Tannoy Stirling and 440x650x250(H)mm for JBL. The margin on the installation surface of the speaker and the post will be 1 cm. By changing the size of the joint between the column and the center part, it is possible to accommodate speakers of various sizes.
DK-40 (for TANNOY STIRLING) | 350×480×400(H)mm |
---|---|
DK-25 (for JBL4344) | 440×650×250(H)mm |
Load-bearing capacity | Approx. 100kg |
In addition, a custom-made type with a tip-over prevention structure, which is used as a speaker stand installed in recording studios for professional use, can also be ordered. The structure is to prevent sideways shifting and falling by fitting the speaker into the four legs of the DK series stand.
By sitting in an L-shape in four places, the bottom of the speaker is enclosed and falls are prevented. The lowered part in the center is the speaker installation area. The speakers installed here do not have to worry about sideways misalignment and prevent falls.