Yamamoto Sound Crafts Siemens 7P Tube Socket

Compatible vacuum tube

211, 845, 242, 832 etc.
Mounting holes 55φ screw spacing 48mm×4

Old vacuum tubes should be used carefully so as not to stress the base section during insertion.

The original tube socket is made of fluorocarbon resin (or Comptonite), with a round machined pin fixed to it. This prevents deterioration of sound quality due to vibration because the tube is held firmly without rattling. The excellent insulating property of fluoroplastic also makes it a key component in the construction of vacuum tube amplifiers.

Explanation of materials used

Fluoroplastic: Official name is ethylene tetrafluoride, which has the highest electrical insulation and dielectric constant of any solid. It also has excellent temperature resistance characteristics.

COMPLITE: A material made by forcibly drying wood and impregnating it with phenolic resin as a base material, which has the same electrical properties as Bakelite, but superior strength. It also has high heat resistance, and its high strength enables it to produce a firm sound.
Phosphor bronze: This material is used for the pins of most tube sockets (except L series). It has high strength, excellent springiness, and maintains stable contact.

Gold platingGold plating: Thick gold plating is applied to most socket pins over a non-magnetic base material (except L series). (Except for the L series) Magnetic materials are also eliminated from the plating as much as possible.