CurrentlyBakoon ProductsWe are developing a new power amplifier.
It is almost complete,AMP-5521
Below is an excerpt of data from Bakoon's Facebook. Looking forward to it.
Maximum output at 10% distortion with 4Ω load: 54W
Maximum output at 10% distortion with 8Ω load: 35W
Maximum output at 1% distortion with 4Ω load: 44.3W
Maximum output at 1% distortion with 8Ω load: 28W
Frequency response (8Ω, 1W): 20Hz: 0dB, 20kHz: 0dB, 50kHz: -0.6dB, 100kHz: -6.29dB
8Ω, 10W: 20Hz: 0dB, 20kHz: 0dB, 50kHz: -0.7dB, 100kHz: -6.4dB
S/N ratio: VR max: -100dB, VR min: -127dB
Output vs. distortion (1kHz)
Output (W) 4Ω 8Ω
0.1 0.1 0.047
0.2 0.14 0.061
0.5 0.22 0.1
1 0.32 0.15
2 0.47 0.23
5 0.76 0.38
10 0.82 0.57
20 0.91 0.68
28 1
30 0.95
35 10
40 1
50 7.4
54 10
As a non-feedback amplifier, the bandwidth has also extended, and I think the distortion is fairly reasonable.
A feature of the SATRI amplifier is that lowering the VR reduces noise, so the S/N improves by 27dB when the VR is lowered.
Another feature is that the bandwidth changes little depending on the output.
