ASTOR SE-KT88EL Vacuum Tube Push-Pull Power Amplifier
Product code: se88el-sASTOR SE-KT88EL Vacuum Tube Push-Pull Power Amplifier
Could not read receipt status
Limited quantity. Due to a model change, we are offering a special price to dispose of chassis inventory! Don't miss out on this opportunity! All transformers used will be made by Astro Electronics.
A wide variety of output tubes can be used
Robust and beautiful mirror-finished chassis
The chassis is made of 1.2~1.5mm thick 18-18 stainless steel with a mirror finish. Chassis are made of 1mm-thick 18-18 stainless steel mirror finish and 1mm-thick oxygen-free copper for internal fittings. The panels are made of 5mm-thick 52S geralumin panels with an anodized finish. This robust and beautiful mirror-finished casing provides exceptional anti-vibration and noise reduction. It also dissipates heat well, so even though it is a vacuum tube amplifier, there is no problem at all even when used for long periods of time.
All transformers used are made by Astro Denshi of equal or better quality than those made by Kanno Denki. Astro Denshi Planning's original transformers are capable of reproducing excellent high quality sound with more natural extension and extension of the low frequency range.
Self-bias allows the user to enjoy a variety of sounds by freely replacing the output tubes in the same system. The self-bias capacitors used by the company are much larger in capacity than those used by most manufacturers. This allows the sound to be expressed well even when the volume is turned down, without sound thinning.
| Tubes used | KT88 x4, 12AX7x2, 12AU7x4 |
|---|---|
| Transformer used | TRX-200M x1, FP-30W-5 x2, L-1-200M x1 |
| Output | 20W x 20W |
| UL Connection | Self-bias |
| Frequency Response | 10Hz~60kHz |
| Residual Noise | Less than 1mmV/1W |
| Distortion | 0.04% / 1W |
| Input impedance | 100kΩ |
| Size | Approx. W400xH175xD360mm |
| Weight | Approx. 15kg |
All transformers used are made by Kanno Denki or Astro Denshi of equal or better quality. Please note that there may be slight specification changes. Please understand this beforehand.
